350Z HR Y-pipe installed on a 2003 G35 - - Infiniti G35 & G37 Forum Discussion | panoramic-3d.ru
Show Your Support Become A Premier Member

    > > >
  • Reload this Page >
    • 350Z HR Y-pipe installed on a 2003 G35


350Z HR Y-pipe installed on a 2003 G35

Thread Tools Rate Thread
Old 09-20-2008, 02:06 AM
Registered User
Thread Starter
iTrader: (9)
Join Date: Aug 2003
location: Kansas City
Posts: 6,573
Thanks: 0
Thanked 64 Times in 43 Posts
2007 350Z HR Y-pipe installed on a 2003 G35

When the 2007 350Z came out with the VQ35HR motor and I saw pictures of the exhaust I took interest in the new Y-pipe. The layout of the y-pipe was entirely different than the Y-pipe that comes on the 2003-2006 G35s (VQ35DE/Revup). What really caught my attention was the longer down tubes and two rubber pucks mounted to the inside portions of the pipe. In exhaust theory, usually the longer the downtube off the header/manifold, the better the torque and powerband. I don't know if this was Nissan was going after, but obviously they saw some sort of performance benefit by substantially revising y-pipe. The rubber pucks were clearly installed to reduce NVH from the exhaust. After discussions with Godmans on this site, it turns out this revised Y-pipe fits because he's had it installed on his 1st gen G35 for a while now. I picked a HR y-pipe for $50 shipped and decided to give it a try for the hell of it. Tony with Motordyne has stated he thought the longer downtubes could improve low/midrange power because he's tested numerous Y-pipe downtube configurations when developing his new exhaust systems.

The DE y-pipe downtubes are about 5" long whereas the HR y-pipe downtubes are over 13" long. The exiting pipe at the midpipe junction is a full 2.5" vs the 2.35" for the DE y-pipe. Major power gains!!!!!!!!!1

Here's a shot comparing the two pipes:



I got the pipe installed tonight. There are no clearance issues and the pipe fits like the DE pipe. I drove around for about 5 miles and the car feels good. The car does feel better down low and in the midrange (nothing earth shattering), but I need to give it a week or so because my experience has been that it takes Nissan ECUs some time to adjust. One thing I did notice was reduced NVH under heavy load (low rpm going up hill and WOT). The exhaust tone is slightly deeper too and is slightly more exotic. Keep in mind I do have the 05/06 midpipe on my 03.

Last edited by DaveB; 09-21-2008 at 04:36 AM.
The Following 3 Users Say Thank You to DaveB For This Useful Post:
CandlestickPark (03-07-2012), dukehotty (05-24-2013), pntballg35 (10-16-2011)
Old 09-20-2008, 02:08 AM
Invalid_User's Avatar
Registered User
iTrader: (23)
Join Date: Sep 2007
location: Tampa,Florida
Posts: 9,739
Thanked 217 Times in 146 Posts
awesome, hmmm interesting, DYNO time!
The Following User Says Thank You to Invalid_User For This Useful Post:
Black_Out (07-30-2015)
Old 09-20-2008, 02:13 PM
Registered User
iTrader: (22)
Join Date: May 2004
Posts: 2,239
Thanked 3 Times in 2 Posts
glad to see that you like the setup
Old 09-20-2008, 04:05 PM
5150DS's Avatar
Registered User
iTrader: (1)
Join Date: Aug 2005
location: So Cal
Posts: 3,984
Thanked 160 Times in 131 Posts
Sounds like a great future mod for early sedan owners. Just wondering, you said the stock y pipe is 2.35", while the revised is 2.5". My question is whether the mid pipe on the early sedan is 2.35" or 2.5"? Also, what is the size of the inlet on the revised y pipe compared to the stock y pipe?
Old 09-20-2008, 11:26 PM
Registered User
Thread Starter
iTrader: (9)
Join Date: Aug 2003
location: Kansas City
Posts: 6,573
Thanks: 0
Thanked 64 Times in 43 Posts
Quote:
Originally Posted by G35_FTMFW
awesome, hmmm interesting, DYNO time!
Wouldn't be very useful because I have never gotten the car dynoed
Old 09-22-2008, 01:17 PM
Registered User
Thread Starter
iTrader: (9)
Join Date: Aug 2003
location: Kansas City
Posts: 6,573
Thanks: 0
Thanked 64 Times in 43 Posts
Quote:
Originally Posted by 5150DS
Sounds like a great future mod for early sedan owners. Just wondering, you said the stock y pipe is 2.35", while the revised is 2.5". My question is whether the mid pipe on the early sedan is 2.35" or 2.5"? Also, what is the size of the inlet on the revised y pipe compared to the stock y pipe?
The midpipe diameter is 2.45". The gasket is 2.5". The downtubes on both y-pipes are 2" ID.
Old 09-22-2008, 01:30 PM
Registered User
Thread Starter
iTrader: (9)
Join Date: Aug 2003
location: Kansas City
Posts: 6,573
Thanks: 0
Thanked 64 Times in 43 Posts
It's been 2.5 days since installing the new y-pipe and I've put on about 60 miles. The pipe must flow differently because I noticed the 5AT shifted a bit more abruptly and got slightly confused (longer delay) when mashing the throttle. I've noticed the same behavior when I've played around with various intake setups and when I had my Borla TD exhaust. As the miles and time has accumulated, the shift logic has been adjusting back to normal.

With regards to exhaust tone/volume and performance, the exhaust is louder, but not excessively so. The VQ warble is more apparent now and the motor has a deeper WOT growl. The car seems to launch harder as the annoying intial bog seems to have been lessend and motor seems to get over that 3000rpm hump when coming off the line. I can spin my 18s with PZeros easier on the launch, BUT it may just be the cooler temps we've been experiencing here in Kansas City fo the past 3 weeks (70s/low 80s). On Saturday night, with the wife and kid in the car, I had to make a pass around a slow moving truck and the G downshifted into 2nd at 40mph, going up hill, and the car took off with what appeared to be more authority. Even the wife noticed it and said "was that the part you added to the car" followed by the backseat 3 y/o driver giggling while saying "wow, daddy went fast". This percieved added performance could be all in my head though. The good news is there seems to be no downside to the pipe other than some additional volume.

I plan to add some videos of the setup this week.
Old 09-22-2008, 01:37 PM
Registered User
iTrader: (2)
Join Date: May 2007
location: DC Metro/Maryland
Posts: 851
Thanks: 0
Thanked 0 Times in 0 Posts
So how would this work on a 04 Coupe with Test pipes....I am interested in it, but would it fit?
Also, where did you order it from?
Old 09-22-2008, 01:57 PM
Registered User
Thread Starter
iTrader: (9)
Join Date: Aug 2003
location: Kansas City
Posts: 6,573
Thanks: 0
Thanked 64 Times in 43 Posts
Quote:
Originally Posted by DrewQ1
So how would this work on a 04 Coupe with Test pipes....I am interested in it, but would it fit?
Also, where did you order it from?
This pipe will bolt on to any 1st gen G35 or 350Z. I got mine from a Z owner on my350z.com.
The Following User Says Thank You to DaveB For This Useful Post:
dj714 (10-22-2012)
Old 09-22-2008, 02:26 PM
Registered User
Join Date: Feb 2008
location: ga
Posts: 237
Thanks: 0
Thanked 1 Time in 1 Post
interesting discovery, good job
Old 09-22-2008, 08:48 PM
Registered User
iTrader: (3)
Join Date: Apr 2003
location: Hamilton, NJ
Posts: 1,080
Thanks: 0
Thanked 0 Times in 0 Posts
interesting, it even just looks more fluid than the original de y-pipe

Last edited by willthethrill; 09-22-2008 at 09:15 PM.
Old 09-22-2008, 08:59 PM
SFLG35's Avatar
FGC President
iTrader: (34)
Join Date: Aug 2003
location: Brandon, FL
Posts: 11,251
Thanks: 0
Thanked 13 Times in 2 Posts
might be a dumb question, but what do you mean by NVH?
looks good though
Old 09-22-2008, 09:19 PM
Registered User
iTrader: (20)
Join Date: Jul 2005
location: Charlotte, NC
Posts: 625
Thanks: 0
Thanked 2 Times in 2 Posts
Quote:
Originally Posted by SFLG35
might be a dumb question, but what do you mean by NVH?
looks good though
i believe it is short for noise, vibration and harshness.
Old 09-22-2008, 11:12 PM
SFLG35's Avatar
FGC President
iTrader: (34)
Join Date: Aug 2003
location: Brandon, FL
Posts: 11,251
Thanks: 0
Thanked 13 Times in 2 Posts
Quote:
Originally Posted by sloppymax
i believe it is short for noise, vibration and harshness.
cool cool thanks
yeh i was think noise vibration harmonics, but wasnt sure.
Old 09-22-2008, 11:58 PM
Rodrigo's Avatar
Registered User
iTrader: (14)
Join Date: Oct 2007
location: South Florida
Posts: 957
Thanked 2 Times in 2 Posts
good find Dave!

Related Topics
Thread Thread Starter Forum Replies Last Post
Am I delusional or does the G35 have a damn good stock exhaust note? TWASkyliner G35 Coupe V35 2003 - 07 26 08-07-2015 09:51 AM
G35 horn not working after getting A/C tested Rehman2009 General Tech Questions 3 07-27-2015 04:23 AM
New Owner - South Carolina Tom_P New Members Check In 5 07-24-2015 05:05 PM
Looking at G35's.... Chattzx The G-Spot 1 07-17-2015 12:23 PM


Tags
2003, 350z, craigslist, custom, g35, hp, hr, hr y pipe, mid, pipe, sedan, size, stock, test, ypipe, ztube
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 04:10 AM.


Copyright ©2002 - 2017, panoramic-3d.ru All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in:

Related pages


how to remove windshield wiper scratcheshow to check camshaft position sensor2015 subaru sti 0-60bushing press tool autozonedriveshaft removal2003 g35 sedan specscleaning afe filter2006 nissan maxima transmission fluid changesals fresno and alluvialwedswheelsblackout taillights18x7 5 rimshonda accord 8th generationclutch 350z303 aerospace protectant where to buy2003 kia sorento alternatorbosch platinum fusionvk56vdfujitsubo exhaust 350z350z weightmegan mufflersnail on side of tire350z vs g35innova obdcastrol edge oil change intervaldrive shaft removalinjen intake g35infiniti g37 turbo kitnissan transponder key programminghow to tighten a serpentine beltnessen forgedhow often to change rear differential fluidbose ipod adapteryokohama yk580 tire reviewserpentine belt installation costautomatic transmission dipstickconcept one wheels rs 55how much to mount and balance a tiremid engine conversion350z coilover installsmoked chrome rimsinfiniti g32cheap rev limiterbosal mufflerd2s bulb wiki2008 infiniti g35 key fob battery replacementgtr kit for g35cold air intake vs short ramjl w7 13.52005 infiniti g35 headlight replacementsynthetic oil autozoneair intake resonatornissan key battery replacement10000 hidwearever brake rotorvq35hr pistonsaltima se-r wheels for saleg35 coupe grillviper 5901 remote programmingg35 coupe rear bumperdriver airbag moduleacura tl vs tl type s2 15 inch kickers370z shifterkw variant 3 coiloversoil catch can benefitsplastidip glossy350z remote startphonebook androidtanabe suspensionfuzion zr1 tirestoyota wheel lock keybosch oil filter 3323glass cleaner for tinted windowsinfiniti g35 valuehow much does it cost to install a clutch