G35 coupe Lowering springs - - Infiniti G35 & G37 Forum Discussion | panoramic-3d.ru
Show Your Support Become A Premier Member

    > > >
  • Reload this Page >
    • G35 coupe Lowering springs


G35 coupe Lowering springs

Thread Tools Rate Thread
Old 02-22-2011, 01:14 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2009
location: boca raton
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
G35 coupe Lowering springs

i have a 2007 g35 6mt and im looking for springs to get a slight drop .5-1.0 inch so i wont have to really worry about camber and can still go over speed bumps. The thing is i cant find a spring that offers this with good spring rates. i looked at the g35 tein H tech but the spring rates are much lower then stock so wouldnt that mean softer suspension and less performance if anything i would want the same spring rates as stock if not even a lil firmer anyone have any ideas? thanks
Old 02-22-2011, 01:34 PM
Registered User
iTrader: (5)
Join Date: Feb 2008
location: DFW TX
Posts: 216
Thanked 8 Times in 8 Posts
Did you consider using oem z springs?
Old 02-22-2011, 01:38 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2009
location: boca raton
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
how much would the drop be? and i heard there are a few variations
Old 02-22-2011, 01:44 PM
Registered User
iTrader: (18)
Join Date: Jul 2009
location: meth central
Posts: 7,302
Thanked 682 Times in 530 Posts
http://panoramic-3d.ru/forums/brakes-...w-updates.html

Quote:
NOTE!: Any aftermarket 350Z spring will lower a coupe a additional ” over and beyond the published drop amount for the 350Z. For sedan owners, the same applies to you, except you will gain a additional 1”, not just ”
Old 02-22-2011, 02:21 PM
Registered User
Join Date: Dec 2010
Posts: 88
Thanks: 0
Thanked 6 Times in 6 Posts
look at the 350z htechs.. right in your preferred drop range and they have decent spring rates - 358f/375r /w ~.8f/.7r drop
Old 02-22-2011, 03:12 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2009
location: boca raton
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
yea but the 350 h tech is firmer up front but softer on the rear wouldnt that be bad?
Old 02-22-2011, 06:26 PM
Registered User
Join Date: Dec 2010
Posts: 88
Thanks: 0
Thanked 6 Times in 6 Posts
I dont think it would matter, but if you are worried about it then just buy revised Z springs as stated above..

they are cheap, they lower you about ~1/2" and keep your stock spring rates
Old 02-22-2011, 06:45 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2009
location: boca raton
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
my car has the same revised springs as the z i have a 07 coupe 6mt
Old 02-23-2011, 02:57 AM
Registered User
iTrader: (7)
Join Date: Mar 2009
Posts: 368
Thanks: 0
Thanked 0 Times in 0 Posts
a while back i was looking for the same type of thing as you and tried the 350z h techs bc i thought the spring rate difference wouldnt be noticeable but i did notice a big decrease in handling with the softer rear springs i also rubbed over big bumps (you may not have that prob if you have a conservative offset) but after trying 2 sets of springs i ended up with coilovers and havnt regretted it for a second just be careful bc some coils have a min drop usually around 1 inch
Old 02-23-2011, 05:25 PM
Buju On Friday's Avatar
Registered User
iTrader: (2)
Join Date: Dec 2010
location: San Diego
Posts: 80
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by apro06g35 View Post
a while back i was looking for the same type of thing as you and tried the 350z h techs bc i thought the spring rate difference wouldnt be noticeable but i did notice a big decrease in handling with the softer rear springs i also rubbed over big bumps (you may not have that prob if you have a conservative offset) but after trying 2 sets of springs i ended up with coilovers and havnt regretted it for a second just be careful bc some coils have a min drop usually around 1 inch
what was the other set of springs you tried and why didn't you like those either?
Old 02-23-2011, 11:41 PM
Registered User
Thread Starter
iTrader: (2)
Join Date: Sep 2009
location: boca raton
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
i want a slight drop so i dont have to worry about camber and same if not firmer spring rate does that exist lol
Old 02-24-2011, 01:57 AM
Buju On Friday's Avatar
Registered User
iTrader: (2)
Join Date: Dec 2010
location: San Diego
Posts: 80
Thanks: 0
Thanked 0 Times in 0 Posts
Did you look at the link posted above??

350z OEM springs will drop you .5"

RSR G35 coupe progressive springs 1”/1” G35 coupe drop
Spring rates in LBS 315/315
Beware, a 1" drop spring with NO increase in stiffness vs oem.

Tein H-tech 350z linear springs .3”/.2” drop on 350Z G35 drop will be higher (.8/.7)
Spring rates in LBS 358/375


All of these are under an inch, so you can get away with nothing else
Old 02-24-2011, 08:56 AM
Registered User
Join Date: Aug 2010
location: South Florida
Posts: 167
Thanks: 0
Thanked 1 Time in 1 Post
And to add to what Buju said, here's how it looks.

No camber kit needed; back to manufacturer's spec........no worries:
Attached Thumbnails
G35 coupe Lowering springs-ds-before-tein-350z-h-tech.jpg G35 coupe Lowering springs-ds-after-tein-350z-h-tech.jpg G35 coupe Lowering springs-ps-before-tein-350z-h-tech.jpg G35 coupe Lowering springs-ps-after-tein-350z-h-tech.jpg
Old 02-24-2011, 11:28 AM
TofuProductions's Avatar
Registered User
iTrader: (9)
Join Date: Dec 2008
location: chicago suburbs
Posts: 2,185
Thanked 5 Times in 5 Posts
heres my coupe on oem 350z springs:

Name: IMG_9791-2.jpg
Views: 1074
Size: 197.4 KB

Name: IMG_9773-2.jpg
Views: 885
Size: 205.6 KB

Name: Martyunder-2.jpg
Views: 824
Size: 100.2 KB

Name: Martylit-2.jpg
Views: 824
Size: 91.8 KB

Last edited by TofuProductions; 02-24-2011 at 11:33 AM.
Old 02-24-2011, 01:51 PM
Registered User
Join Date: Aug 2010
location: South Florida
Posts: 167
Thanks: 0
Thanked 1 Time in 1 Post
Niiiiiiiiiice, Tofu. I like.

Gotta holler atcha on another thread re: RAS, aka 4WAS.

You reminded me of something!! (Smart a$$. )

Seriously, though, it was good catch. We're cool. I left myself open for that one.

Quote:
Originally Posted by TofuProductions View Post
heres my coupe on oem 350z springs:







The Following User Says Thank You to Bozo954 For This Useful Post:
OtisG35 (07-03-2011)

Related Topics
Thread Thread Starter Forum Replies Last Post
FS: set of spring from 05 g35 coupe w/sports suspension laksjd84 Steering & Suspension 16 07-12-2017 01:22 AM
FS[Canada]: G35 OEM Style Lip Spoiler netcbc Exterior - Body Parts CDN 2 08-21-2015 10:50 AM
FS: G35 coupe front splash guards in black obsidian color laksjd84 Exterior - Body Parts 1 07-24-2015 06:12 PM
FS[Canada]: 2003+ infiniti g35 350z tein basic coilover damper kit springs netcbc Steering & Suspension CDN 0 07-24-2015 12:25 PM
WTB[SoEast]: 2005 Sedan OEM or OE Springs Scredeur4 Steering & Suspension 1 07-17-2015 07:30 AM


Tags
350z, copes, coupe, drop, forum, g35, inch, kit, lower, lowering, oem, spring, springs, suspension, techs, tein
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 09:52 AM.


Copyright ©2002 - 2017, panoramic-3d.ru All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in:

Related pages


mini d2spassport 8500 x50 redcalibrate spark plugscostco ameriprise insuranceavn30dcompustar alarm reviews2002 infiniti qx4 problemsh&r springs miatatokico d spec strutsautodipddx8901hd kenwoodvibrant stealth muffler reviewagency power 350zhid color tempsar383fixing front bumper2006 nissan maxima transmission fluid change2008 bmw 335i reliabilitynismo wheels 370zhow to loosen the tension on a serpentine belt2000 infiniti g20thow to install rca converterhow to fix a sticking brake caliperservice engine soon reset370z fog lights2013 infiniti g37 0-60throttle body spacers workhawk performance ceramic pads reviewcontinental dws tires reviewshre 593rsaftermarket radio kitgreddy ti-cwheel offsets chartxxr 521 16x8are xxr rims goodpioneer avic-f700bt troubleshootingnankang ns2 tiresadjusting handbraketpms ecunissan maxima y piperent tools autozone6th generation maxima4 ohm speakers to 2 ohmstaggered rims meaningss595 reviewgodspeed turbo kit 350zp0430 catalyst efficiency bank 2mikes tint shop orangepioneer avic n1 partstighten parking brakemrr gf7trans go shift kitinfiniti g35 wheel bearingmishimoto radiator fanlug nut sockethow much to replace a serpentine beltclean 240sxtokico springslaser iridium spark plugs reviewjdm wheel spacerswhat does svc mean on radioplasti dip chromevip infiniti q45difference between 10w30 and 5w30 oil2006 mazdaspeed 6 reliabilitypioneer x5600e46 330ci zhpbob long intimidator paintball gunneochrome rimslight seafoamhow much is a quart of oilg35 lambo doorschrome trim tapekyb strut mounts