OEM Brembo Brake Swap (In Work) - Page 5 - - Infiniti G35 & G37 Forum Discussion | panoramic-3d.ru
Show Your Support Become A Premier Member

    > >
  • Reload this Page >
    • OEM Brembo Brake Swap (In Work)


OEM Brembo Brake Swap (In Work)

Thread Tools Rate Thread
Old 04-24-2011, 11:25 PM
Registered User
Thread Starter
iTrader: (10)
Join Date: Aug 2009
location: Wichita Falls, TX
Posts: 426
Thanks: 0
Thanked 6 Times in 5 Posts
ok here it goes.. first put it up on jack stands and remove wheel and tire assemblies. remove rotors, remove e-brake shoes and hardware, to include the cable, its bolted from the back and there is a pin that drops out so the other side comes off. now remove both drive shafts (i did first side without but it took about 2 hrs longer fighting with it) you may have to use a gear puller or similar to remove the shafts all the way. now there are 4 bolts that hold the bearing assembly on, take those off and knock the assembly free. now the only thing holding the shield on is two nuts from the back side, take them out and shield will drop right off. reverse process to reinstall. let me know if you have any questions.
Old 07-10-2011, 02:26 PM
Registered User
Join Date: Mar 2010
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by XDR-V35 View Post
ok here it goes.. first put it up on jack stands and remove wheel and tire assemblies. remove rotors, remove e-brake shoes and hardware, to include the cable, its bolted from the back and there is a pin that drops out so the other side comes off. now remove both drive shafts (i did first side without but it took about 2 hrs longer fighting with it) you may have to use a gear puller or similar to remove the shafts all the way. now there are 4 bolts that hold the bearing assembly on, take those off and knock the assembly free. now the only thing holding the shield on is two nuts from the back side, take them out and shield will drop right off. reverse process to reinstall. let me know if you have any questions.
Thanks for your help. Finally got it done a few months ago
Old 07-12-2011, 03:04 PM
Registered User
Thread Starter
iTrader: (10)
Join Date: Aug 2009
location: Wichita Falls, TX
Posts: 426
Thanks: 0
Thanked 6 Times in 5 Posts
good to hear
Old 07-26-2011, 12:47 AM
Registered User
iTrader: (1)
Join Date: Apr 2011
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
So I have put in my brembo front calipers I purchased off ebay and my z1 lines and drilled slotted rotors and hawk hps pads. I have done many a brake job I am a mechanic as a profession. I have not done a lot of brembo work I usually do work on basic sliding calipers not fixed so I am not completely familiar with the setup.

What I need to know is why my right front caliper would make a horrible screeching noise upon application. I notice that the noise stays for about a half a second to a second after I let the peddle go. It is a VERY loud noise. Someone recommended rebuilding all the calipers. Are the dust shields really that different in the front? I used the stock ones and it fits fine the dust shield isnt hitting the rotor everything is very well greased. THe clips and pins are in properly I cannot figure out what is wrong! Has anyone seen heard of something like this?
Old 07-26-2011, 08:10 AM
Registered User
Thread Starter
iTrader: (10)
Join Date: Aug 2009
location: Wichita Falls, TX
Posts: 426
Thanks: 0
Thanked 6 Times in 5 Posts
dust shields are same in front. check the low pad indicators on the pads??
Old 01-27-2012, 03:19 PM
Registered User
iTrader: (1)
Join Date: Jan 2012
location: Van Nuys, Ca. (Los Angeles)
Posts: 89
Thanked 1 Time in 1 Post
Will This swap work on an 05' 2DR?
Old 01-27-2012, 03:21 PM
Registered User
Thread Starter
iTrader: (10)
Join Date: Aug 2009
location: Wichita Falls, TX
Posts: 426
Thanks: 0
Thanked 6 Times in 5 Posts
Should be no problem for 05, 03-06 brakes are interchangeable.
Old 01-27-2012, 08:39 PM
Registered User
iTrader: (1)
Join Date: Jan 2012
location: Van Nuys, Ca. (Los Angeles)
Posts: 89
Thanked 1 Time in 1 Post
Quote:
Originally Posted by XDR-V35 View Post
Should be no problem for 05, 03-06 brakes are interchangeable.

-I ask because, I called Infiniti dealer and the guy from parts said it wouldn't.
Old 01-27-2012, 08:47 PM
Registered User
Thread Starter
iTrader: (10)
Join Date: Aug 2009
location: Wichita Falls, TX
Posts: 426
Thanks: 0
Thanked 6 Times in 5 Posts
That's a generic response, if they sell you the stuff and it don't work they could be held liable. My 03 sedan had 350z brakes.
Old 01-27-2012, 09:00 PM
eZg eZg is offline
Registered User
iTrader: (4)
Join Date: Apr 2008
Posts: 251
Thanked 5 Times in 5 Posts
They def ARE. Did it on my 06. Just a couple of bolts difference and trimming of dust shields.

Search for threads here or on my350z.com
Old 09-25-2012, 09:58 PM
Registered User
iTrader: (4)
Join Date: Mar 2012
location: Sacramento, CA
Posts: 274
Thanked 3 Times in 3 Posts
if infiniti fix their brembo brake problems, then my 05 would have them too...but no...
Old 09-25-2012, 09:59 PM
Registered User
iTrader: (4)
Join Date: Mar 2012
location: Sacramento, CA
Posts: 274
Thanked 3 Times in 3 Posts
Quote:
Originally Posted by DanielDrummer14 View Post
Will This swap work on an 05' 2DR?
Im pretty sure it does because i remember someone in the forum installing oem brembo on the 05, but not absolutely sure,
Old 09-26-2012, 07:58 PM
Registered User
iTrader: (7)
Join Date: Nov 2007
location: Fullerton, CA
Posts: 3,982
Thanked 140 Times in 129 Posts
I have done this swap to my 06 coupe if anybody was wondering for future reference.
Old 01-08-2013, 07:26 PM
Registered User
Join Date: Sep 2012
location: OKC, OK
Posts: 44
Thanked 0 Times in 0 Posts
Thanks for the writeup. I'm gonna look into getting some brembos for my '04 Sedan sport and i was wondering if the wheels in this pic will clear the calipers or not. I DO NOT intend to keep those wheels but there are a few little performance things I'd like to do before putting wheels on it, namely the Brembos and '06 updated 350Z suspension. The stock ones haul it down pretty good, now but I've heard things about brake fade if you're being hard on them for any length of time (like a track day).

Name: 2012-09-22091030_zps07b802a2.jpg
Views: 88
Size: 287.5 KB
Old 08-17-2015, 01:09 AM
Registered User
Join Date: Nov 2014
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Thanks for this thread, I done my swap for my 05 coupe.








Related Topics
Thread Thread Starter Forum Replies Last Post
Opinions on offset for 03 G35 Coupe Popes Wheels & Tires 3 07-29-2015 06:07 PM
Wanting to Buy a G35 (350GT) my events Karnicle G35 Sedan V35 2003-06 1 07-23-2015 06:08 AM
How much is my car worth? 2004 6MT Brembo.. vstypicals Buying, Selling & Leasing Discussion 6 07-20-2015 11:55 PM
Decisions, decisions... mushu G35 Sedan V35 2003-06 17 07-15-2015 04:55 PM


Tags
17, brake, braking, brembo, brembos, caliper, g35, kit, line, nonbrembos, oem, rims, size, spacer, swapping
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 02:58 AM.


Copyright ©2002 - 2017, panoramic-3d.ru All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Related pages


cost to replace power steering belttang band 6.5 subwooferl7 15 inch kickerinch pound torque wrench searsz32 forumswheel refinishing vancouverkumho tire problemsclear bra diyvellano rims for salekelly infinitylaser spark plugshow many quarts go in a gallon2007 catalytic converterdo it yourself transmission flushrockford fosgate punch p200 2narrow band oxygen sensorg35 vs g35xkenworth t800 headlightsinfiniti g35 2004 interiorjames window tinting12k hid headlightsg37 service manualaftermarket headlight assembly replacement350z dc headershub bearing pullercar shakes when slowing downplasti dip aluminiumvolk racing f zerophilips ultinontiburon turbo manifoldtps report cover sheetpolk momo 10d2 coil overbc coilover height adjustment350z plenum spacertimken wheel bearings1010 wheel tire calculatoraxis supermeshapple auto glass torontomotordyne xyzreplaced fuel pump now gas gauge not workinghow to remove 6 disc cd changercustom rear diffuserg35 oil filter locationoffsets on wheelsrubber edge moldingsarona roof spoileramc theatre kennedy commonsmemphis subwoofers 12infiniti g35 service engine soon2009 g37xare kyb shocks any goodracinghart wheels2003 acura tl wheel bolt patterng35 headlight lenskoni yellowshid 8000k bulbspo456 codeg35 radio repairhydro shield for cold air intakevaydor g35 kitreplacing a camshaft sensorrobbins repairables henrietta north carolinafive point harness racing seatsfoggy windshieldkenwood kos-v1000axxess wire harnesscoolant air bleederactivate sirius in carobsidian lexus colorkenwood kac-x520rwd vs awd in snowjl 10w3v2-d4what is a sprint boostercost to change valve cover gasketinfiniti g35 sedan accessoriespassport escort 8500 x50pontiac vibe supercharger