DIY: rolling your own fenders. - - Infiniti G35 & G37 Forum Discussion | panoramic-3d.ru
Show Your Support Become A Premier Member

    > >
  • Reload this Page >
    • DIY: rolling your own fenders.


DIY: rolling your own fenders.

Thread Tools Rate Thread
Old 01-27-2007, 06:21 AM
accordfreak's Avatar
Registered User
Thread Starter
iTrader: (14)
Join Date: Jun 2003
Posts: 3,223
Thanks: 0
Thanked 13 Times in 7 Posts
DIY: rolling your own fenders.

This is for those who are thinking of rolling their own fenders. I am not responsible if you do anything wrong. This is just a guide.

Fender rolling costs about 100-150 around here which is a rip off for something so simple. I just went to home depot and bought a
$1.50 sch 40 2" PCV pipe.

Saved myself $98.50 for other cool mods

Here is the stock fender.

Name: stockunrolled.jpg
Views: 237
Size: 70.1 KB

I started by jacking car enough for the PCV pipe to fit between the tire and the fender to bend the lip. I then heated up the fender with a hair dryer until it was warm. I started from the left side and pushed/rolled the pcv pipe towards the middle with the hair dryer following the pipe. I did the same starting from the right. Don't try to bend the lip with just one pass. I did serveral passes to make sure the paint didn't crack

Name: pcvpipehairdryer.jpg
Views: 741
Size: 56.2 KB

Keep it at an angle and roll like seen below to bent the lip even more.

Name: pcvpipe2.jpg
Views: 347
Size: 72.5 KB


done!

Name: done.jpg
Views: 222
Size: 45.7 KB

looks good?

Name: done2.jpg
Views: 217
Size: 62.7 KB

It's easier with two people.. one person holding the dryer and the other angling, pushing and rolling the pcv pipe. It was quite hard holding the dryer and rolling at the same time.


goodluck It was my first time rolling a fender too haha

for more info go to:

Old 01-27-2007, 06:52 AM
drsifu1's Avatar
Staff ALUMNI
iTrader: (11)
Join Date: May 2003
location: San Diego Area
Posts: 2,394
Thanks: 0
Thanked 7 Times in 6 Posts
you r a legend...the DIY master.

all it really takes is something like this write-up to get others like myself to do it. now the question...how much to rent that PVC pipe?

must have come from your honda days

thanks david.

Last edited by drsifu1; 01-27-2007 at 07:16 AM.
Old 01-27-2007, 06:56 AM
Calvin's Avatar
Overglorified Altima
iTrader: (65)
Join Date: Jun 2006
location: Chicago
Posts: 53,505
Thanked 179 Times in 122 Posts
sick. thanks for the write up. looks clean, too!
Old 01-27-2007, 09:19 AM
Registered User
iTrader: (8)
Join Date: Dec 2005
location: Kentucky
Posts: 664
Thanks: 0
Thanked 0 Times in 0 Posts
I vote for a sticky
Old 01-27-2007, 04:37 PM
Registered User
iTrader: (1)
Join Date: Feb 2006
location: 626
Posts: 1,154
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by drsifu1
you r a legend...the DIY master.

all it really takes is something like this write-up to get others like myself to do it. now the question...how much to rent that PVC pipe?

must have come from your honda days

thanks david.
Back in the honda days we take our wooden bats to do that, it was a multi tasker!
Old 01-28-2007, 10:58 PM
redlude97's Avatar
Registered User
iTrader: (25)
Join Date: Feb 2006
location: Seattle, WA
Posts: 1,911
Thanks: 0
Thanked 8 Times in 5 Posts
Can you get a full roll with that method though, some people might need more clearance
Old 01-29-2007, 09:57 PM
SFLG35's Avatar
FGC President
iTrader: (34)
Join Date: Aug 2003
location: Brandon, FL
Posts: 11,251
Thanks: 0
Thanked 13 Times in 2 Posts
awesome write up thanks

on renting a pipe just go to lowes buy it, and then return it.
Old 01-30-2007, 02:36 AM
accordfreak's Avatar
Registered User
Thread Starter
iTrader: (14)
Join Date: Jun 2003
Posts: 3,223
Thanks: 0
Thanked 13 Times in 7 Posts
Quote:
Originally Posted by redlude97
Can you get a full roll with that method though, some people might need more clearance

you would probably have to use something that won't bend. (i.e. baseball bat) the pcv pipe was bending from the heat and the amount of force being pushed against the pipe. You could probably use a solid wooden cylinder.



as for returning... i'm sure you can't return something that look like this.....
hahah
Attached Thumbnails
DIY: rolling your own fenders.-img_6189.jpg

Last edited by accordfreak; 01-30-2007 at 02:39 AM.
Old 01-30-2007, 03:25 AM
Registered User
iTrader: (5)
Join Date: Aug 2006
Posts: 944
Thanks: 0
Thanked 0 Times in 0 Posts
awesome DIY, will try this weekend
Old 01-30-2007, 09:30 AM
SFLG35's Avatar
FGC President
iTrader: (34)
Join Date: Aug 2003
location: Brandon, FL
Posts: 11,251
Thanks: 0
Thanked 13 Times in 2 Posts
Quote:
as for returning... i'm sure you can't return something that look like this.....
sure you can just say that it didnt work for what you needed lol
Old 01-30-2007, 01:13 PM
Registered User
iTrader: (9)
Join Date: Sep 2006
Posts: 836
Thanks: 0
Thanked 1 Time in 1 Post
what exactly is the dryer for. i need to roll my rear fender to get my jp scaras to fit.
Old 01-30-2007, 01:16 PM
Registered User
iTrader: (9)
Join Date: Sep 2006
Posts: 836
Thanks: 0
Thanked 1 Time in 1 Post
nvm i read the thread. im sure if i do this i will mess it up
Old 01-30-2007, 01:23 PM
Registered User
iTrader: (5)
Join Date: Aug 2006
Posts: 944
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by spooze
what exactly is the dryer for. i need to roll my rear fender to get my jp scaras to fit.
pretty sure its a heat gun....so your paint wont crack
Old 01-30-2007, 06:04 PM
Diesel1's Avatar
Moderator
iTrader: (7)
Join Date: Jun 2003
location: Long Island
Posts: 4,045
Thanks: 0
Thanked 0 Times in 0 Posts
Correct it makes the paint more elastic which makes it less susceptible to chipping. A wooden baseball bat may work a lil easier.
Old 01-30-2007, 06:14 PM
Jeff92se's Avatar
Red Card Crew
iTrader: (24)
Join Date: May 2005
location: ɐʍ 'ǝlʇʇɐǝs
Posts: 35,467
Thanked 523 Times in 438 Posts
Great post! Thanks. I've been pondering a way to get my rears rolled on my sedan w/ the coupe 19s + 245s!

Related Topics
Thread Thread Starter Forum Replies Last Post
A few problems I have questions about Dallsinghjr1 G35 Coupe V35 2003 - 07 10 09-17-2016 10:39 AM
No Rear Fender Roll, Tire/Wheel Fitment DRG35R Wheels & Tires 19 01-31-2016 08:14 AM
Sticking Caliper Issue dcsbh1 Brakes & Suspension 0 10-01-2015 04:15 PM
How do I fix a body roll issue? NyCrAzY Brakes & Suspension 13 10-01-2015 10:19 AM
New guy from Western North Carolina ncg35guy New Members Check In 3 09-26-2015 05:04 PM


Tags
aluminum, bat, diy, door, dryer, fender, fenders, g35, hair, miami, pipe, pvc, roll, rolling, wood
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 03:00 PM.


Copyright ©2002 - 2017, panoramic-3d.ru All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Related pages


how to install throttle body spacerinfinity g35 mpgobdii trouble codessupercharge and turbocharge300zx z1jdm g35valeo vs bosch wiper bladesdiy centrifugal superchargerbose in dash car stereokicker head unit2009 infiniti g37x coupe specswhere to buy optimum car waxchrome plating in njpolished intakemoven rimsg35 radio repairhow to prevent rust on brake rotorslxz wheelsenkei sbc finishvq35hr engine for saletpms sensor toolcarprousabuy volk wheelsbroken tail light repair costg35 headershow to prep wheels for paintis bi wiring speakers worth itamsoil gl-4mevotech ball joint reviewescort corddmax body kitnissan shreveportg35 2006 coupelamborghini doors upinfiniti g37s 2009g37 shift knobviper smartstart reviewsfx35 0 60shave door kitsdeep creep bandgarmin gps power cordspray for rimsnissan 350z nismo specsillest license plate frameinfiniti g35 tire pressure sensorpush in rivetsdipyourcar comair intake sensor problemsinfinity coupesfs tire edison njneo lug nutscar ac smells badwheelfire reviewskeyflipp0304 engine codetapioca express natomasvct solenoid19x12g2 caliper paint retailerstint laws in nyaltima se-r rims for salestabilizer link rodrsr exmagfast track toll violationxxr 521 16recaro topline2004 infiniti g35 kbbg35 vs tl8th gen honda accord coupevq35de firing orderkonig lace wheelshow to chrome plate wheelsblank speeding ticketjunction produce curtainsbrakenetic reviewgtr rays wheels